- nesC 81.9%
- Jupyter Notebook 18.1%
| Filename | Latest commit message | Latest commit date |
|---|---|---|
| figures | ||
| scripts | ||
| CITATION.cff | ||
| environment.yml | ||
| LICENSE | ||
| README.md | ||
Oelsmann-etal_2026_NatComm
Subsidence more than doubles sea-level rise today along densely populated coasts
Author Information
Julius Oelsmann1,2*, Robert J. Nicholls3,4, Daniel Lincke5, Marta Marcos6, Manoochehr Shirzaei7, Laura Sánchez1, Leonard Ohenhen8, Denise Dettmering1, Jochen Hinkel5,9, Benjamin P. Horton10, Florian Seitz1
1 Deutsches Geodätisches Forschungsinstitut, Technische Universität München, Arcisstraße 21 80333 München, Germany
2 Department of River-Coastal Science and Engineering, Tulane University, 6823 St. Charles Avenue, New Orleans, LA 70118, USA, Email: joelsmann@tulane.edu
3 Tyndall Centre for Climate Change Research, University of East Anglia, Norwich, UK
4 School of Engineering, University of Southampton, Southampton, SO17 1BJ, UK
5 Global Climate Forum, Neue Promenade 6, 10178 Berlin, Germany
6 IMEDEA, (UIB-CSIC), Miquel Marquès, 21, Esporles, 07190, Balearic Islands, Spain
7 Department of Geosciences, Virginia Tech, Blacksburg, VA, USA.; Virginia Tech National Security Institute, Virginia Tech, Blacksburg, VA, USA. Institute for Water, Environment and Health, United Nations University, Hamilton, Ontario, Canada.
8 University of California, Department of Earth System Science, Irvine, CA, USA
9 Resource Economics Group, Albrecht Daniel Thaer-Institute and Berlin Workshop in Institutional Analysis of Social-Ecological Systems (WINS), Humboldt-Universität zu Berlin, Germany
10 School of Energy and Environment, City University of Hong Kong, Hong Kong SAR
Corresponding author
Correspondence to: Julius Oelsmann, joelsmann@tulane.edu; julius.oelsmann@tum.de
Abstract
Despite its strong influence on relative sea-level (RSL) rise, there is still low confidence in estimates of vertical land motion (VLM) and its contribution to RSL change. To address this problem, we synergize diverse VLM data, which now cover almost 65% of the coastal population, and are key to resolve small scale subsidence, including East, South, and Southeast Asian cities and populated deltaic regions, largely not covered by earlier geodetic measurements. We find that the average modern (1995-2020) global RSL rise experienced by coastal populations (6 mm/year) is about twice the climate-driven absolute sea-level rise. This reflects a strong tendency for higher rates of subsidence in densely populated areas, with 71% of the global coastal population living in subsiding regions. Paired with community efforts to extend consistent observations, these data are essential to ensure reliable estimates of present and future RSL rise to support risk and adaptation assessment.
Journal reference
Oelsmann, J., Nicholls, R. J., Lincke, D., Marcos, M., Shirzaei, M., Sánchez, L., Ohenhen, L., Dettmering, D., Hinkel, J., Horton, B. P. & Seitz, F. Subsidence more than doubles sea-level rise today along densely populated coasts. Nature Communications (2026). https://doi.org/10.1038/s41467-026-72293-z
Data reference
Input data
Please download the following datasets and place them in their respective subfolders under input_data/:
-
input_data/OE24/
The global VLM reconstruction from Oelsmann et al., 2024 [OE24] is available at
https://zenodo.org/records/8308347 -
input_data/NGL_GNSS/
GNSS VLM data [Blewitt et al., 2018] are available at
https://geodesy.unr.edu/velocities/midas.IGS14.txt -
input_data/InSAR_EU/
InSAR VLM estimates for Europe can be downloaded from the EGMS data explorer:
https://egms.land.copernicus.eu/Note, that this dataset can so far only be downloaded by selecting tiles manually.
-
input_data/InSAR_US/
InSAR VLM data for the US [Ohenhen et al., 2024] are provided for different regions:- Pacific coast: https://doi.org/10.7294/17711000
- Atlantic coast: https://doi.org/10.7294/19350959
- Gulf coast: https://doi.org/10.7294/22731326
-
input_data/InSAR_Cities/
The InSAR city subsidence data from Shirzaei et al., 2024 are available at:
https://data.lib.vt.edu/articles/dataset/InSAR-Based_Coastal_Land_Subsidence/25864435/1 -
input_data/InSAR_Tay/Download data from Tay et al., 2022 from: https://researchdata.ntu.edu.sg/dataset.xhtml?persistentId=doi:10.21979/N9/GPVX0F (Note that this data is only needed for obtaining a list of some of the largest coastal cities) -
input_data/Mississippi_Delta/
Delta InSAR data from Nienhuis and Törnqvist, 2017 are available at:
https://osf.io/m83z4/files/osfstorage -
input_data/InSAR_Deltas/
The delta-subsidence data from Ohenhen et al., 2025 / Ohenhen et al., 2026 are available at Zenodo:
https://doi.org/10.5281/zenodo.15015923 -
input_data/InSAR_China/
Subsidence data for Chinese cities [Ao et al., 2024] can be obtained from:
https://www.science.org/doi/10.1126/science.adl4366#supplementary-materials -
input_data/Caron2018/
The GIA estimates contained in the VLM data are available at:
https://vesl.jpl.nasa.gov/solid-earth/gia/ -
input_data/CMEMS/
The ASLC data were obtained from:
https://data.marine.copernicus.eu/product/SEALEVEL_GLO_PHY_L4_MY_008_047/description -
input_data/Nicholls2021/
The information on the coastal segments of the DIVA model (location, population, length) and the VLM estimates of NI21b can be obtained from the source files provided at:
https://www.nature.com/articles/s41558-021-00993-z#Sec16
Notes:
- Most of these datasets have been interpolated on the high-resolution DIVA coastal grid (see Methods).
- The original datasets are not published in this repositories, but are available in their original repositories
- The EGMS data needs to be downloaded manually. The converted *netcdf file can be obtained from the author on request.
- Efforts to make these datasets more accesible are underway!
- Some of the datasets are also important for plotting Figure 1.
Output data
Output Data is provided on zenodo (https://doi.org/10.5281/zenodo.19830370) and at : ./scripts/data/
| description | size | filename |
|---|---|---|
| VLM data in large coastal cities | 4.0K | City_VLM_comparison.csv |
| VLM data in large coastal cities with additional information | 16K | City_VLM_comparison.xlsx |
| Global VLM estimates on DIVA grid (main file) | 1.7M | Global_VLM_data_Oelsmann_2025_data_supplement.nc |
| VLM data in deltas (averages) | 16K | SI_Deltas_overview.xlsx |
Contributing modeling software
We recommend using a dedicated Conda environment for this repository.
Requirements
- Conda
- Python 3.6.10
1. Create the environment
Create the Conda environment from the provided environment.yml file:
conda env create -f environment.yml
conda activate sl_iq
2. Install additional required packages
Install sealeveltools from GitHub:
pip install git+https://github.com/oelsmann/sea_level_tool.git@master#egg=sealeveltools
Install cartopy from conda-forge if needed:
conda install -c conda-forge cartopy
3. Verify the installation
Start Python, Jupyter Notebook, or JupyterLab within the activated environment and confirm that the required packages import without error.
Notes
- The
environment.ymlfile contains the main package requirements for this repository. - Geospatial packages such as
cartopy,geopandas, andrasterioare generally installed most reliably throughconda-forge. - The
sealeveltoolspackage must currently be installed manually from GitHub.
Reproduce my experiment
- Install the software components required to conduct the experiment from contributing modeling software
- Download and install the supporting input data required to conduct the experiment
- Run the following scripts in the
scriptsdirectory to compare my outputs to those from the publication
| Script Name | Description | How to Run |
|---|---|---|
| 1_estimate_china_VLM.ipynb | script to map china csv city averages to DIVA rgid | execute in jp-notebook |
| 2_combine_VLMsources_globally.ipynb | script to combine VLM data from OE24, GIA, EU, USA, New Zealand | execute in jp-notebook |
| 3_add_delta_VLM.ipynb | script to add Delta data from Ohenhen et al., 2026 and Nienhuis and Törnqvist, 2017 | execute in jp-notebook |
| 4_plots.ipynb | script to make all main paper plots, and some SI figures | execute in jp-notebook |
| 5_SI_plots.ipynb | script to generate remaining SI figures | execute in jp-notebook |
Reproduce my figures
Use this script to reproduce the figures used in this publication.
| Script Name | Description | How to Run |
|---|---|---|
| 4_plots.ipynb | script to plot results | execute in jp-notebook |