Sovereign 8s.is mirror of 8b-is/tdeck-omni
- C++ 56.2%
- Rust 42.6%
- Python 1.2%
| Filename | Latest commit message | Latest commit date |
|---|---|---|
| lib/rust_wave_core | ||
| rust-wave-core | ||
| src | ||
| tests | ||
| .gitignore | ||
| flash_watch.py | ||
| platformio.ini | ||
| README.md | ||
📟 8b-is/tdeck-omni — LilyGO T-Deck Sovereign Pocket Cyberdeck (cheet.is RTX 6000 Ada + agy + WhatsApp)
Sovereign ESP32-S3 (16 MB QIO Flash · 8 MB OPI PSRAM) pocket cyberdeck firmware for the LilyGO T-Deck (CC:BA:97:00:45:24), linking all built-in hardware over Wi-Fi Nomad, Bluetooth LE (8B Mesh), and Sub-GHz LoRa (SX1262) directly to cheet.is (49.13.101.247 — NVIDIA RTX 6000 Ada 48GB), AlexiAI, agy, and WhatsApp (https://wa.8b.is).
🛠️ Built-In Hardware Pinout & Drivers (src/main.cpp)
| Subsystem | Controller / Bus | GPIO Pins | Firmware Capabilities |
|---|---|---|---|
| Master Power Rail | BOARD_POWERON |
GPIO 10 (HIGH) |
Latched HIGH on first instruction of setup() so LCD, Keyboard, Speaker, Mic, and LoRa stay powered on. |
| 2.8" IPS TFT Display | ST7789 (320×240) |
MOSI=41, MISO=38, SCLK=40, CS=12, DC=11, BL=42 |
Zero-dependency 40 MHz hardware SPI RGB565 HUD with live Wi-Fi/LoRa/Battery header, 9-line WhatsApp + AlexiAI/agy chat feed, and interactive command bar. |
| Physical QWERTY Keyboard | ESP32-C3 I2C Slave (0x55) |
SDA=18, SCL=8 (400 kHz) |
Live keystroke polling with tactile 864 Hz speaker click, backspace, and Enter dispatch to cheet.is (http://49.13.101.247:8795/api/tdeck/command). |
| 5-Way Optical Trackball | Hall / GPIO Pulses | UP=3, DOWN=15, LEFT=1, RIGHT=2, CLICK=0 |
Center click dispatches active prompt or fires /status + 432→528→864 Hz triad chime. |
| Built-In Speaker | MAX98357A I2S DAC |
BCLK=7, WS=5, DOUT=6 |
Plays 432 → 528 → 864 Hz Harmonic Triad Boot Chime, tactile keyboard clicks, and incoming WhatsApp/A6000 message alerts. |
| Dual Microphone Array | ES7210 I2S ADC (0x40) |
MCLK=48, BCLK=47, WS=21, DIN=14 |
Verified on I2C 0x40 for push-to-talk voice streaming to cheet.is. |
| Sub-GHz LoRa Radio | Semtech SX1262 |
CS=9, DIO1=45, RST=17, BUSY=13 |
Verified via SPI GetStatus (0xC0) for off-grid packet mesh fallback. |
| Battery Monitor | 2:1 Voltage Divider | GPIO 4 (ADC1_CH3) |
Real-time millivolt (mV) telemetry in the top status bar. |
⚡ First-Time Flash from Meshtastic (Switching to Hardware USB-JTAG)
Because factory Meshtastic uses software TinyUSB (ARDUINO_USB_MODE=0), put the T-Deck into ROM Bootloader mode once:
- Press and hold the center Trackball button (
BOOT/GPIO 0). - While holding the Trackball down, flip the T-Deck side power switch OFF and back ON (then release the Trackball).
flash_watch.py(orpio run -t upload) automatically flashesfirmware.binwith-DARDUINO_USB_MODE=1 -DARDUINO_USB_CDC_ON_BOOT=1, permanently enabling Hardware USB-Serial-JTAG so future updates never require pressing the button again.